|
Re: Trim for motors
Quote:
Originally Posted by Daniel_LaFleur
This will work well, but remember that the orifice of the relieving regulator is very small. Probably on the order of .010" effective orifice size, maybe smaller. This means that while it will bleed out excess pressure, it will do so reletively (sp?) slowly.
|
Wow, I didn't realize it was that small!  You're absolutely correct, that might limit this systems usability. And, I'm certain we are not allowed to modify the regulators. I'll have to verify this against the rules.
[EDIT] Yep, can't be modified by my reading of rule <R71>
Quote:
<R71>
In addition to the items included in the Kit Of Parts, pneumatic system items specifically permitted on 2009 FRC ROBOTS include the following items. All included items must be “off the shelf” pneumatic devices rated by their manufacturers for pressure of at least 125psi, and used in their original, unaltered condition (except as required for assembly with other components).
|
[/EDIT]
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
Last edited by billbo911 : 16-01-2009 at 12:56.
|