[DtD]

I made these batch files to switch between Static IP and DHCP in Windows. I use them because I use my laptop's Wireless at school, and wired to program our robot, but at home I use the Wired.

To use them, just paste the commands in notepad and save as a .bat (EG: "cRIO Mode.bat" or "Internet Mode.bat")

cRIO / Static IP Mode:

@echo off
netsh interface ip set address name="Local Area Connection" static 10.23.34.6 255.0.0.0 10.23.34.4 1
pause

NOTE: You need to change the addresses to your team number. We are 10.23.34.*, but you probably aren't!

DHCP Mode:

@echo off
netsh interface ip set address "Local Area Connection" dhcp
pause

~DtD
PS> If you typically use a static IP when not talking to your robot, and you need to configure DNS servers too, then use these commands:

netsh interface ip set dns "Local Area Connection" static 208.67.222.222
netsh interface ip add dns "Local Area Connection" 208.67.220.220 index=2

That sets it to use OpenDNS...