Thread: Assigning Joystick buttons....
View Single Post
  #5   Spotlight this post!  
Unread 24-06-2002, 00:59
archiver archiver is offline
Forum Archival System
#0047 (ChiefDelphi)
  
Join Date: May 2001
Location: Pontiac, MI
Posts: 21,214
archiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond repute
Actually...
Posted by Nate Smith at 2/18/2001 3:25 PM EST


Other on team #66, Frostbite, from Willow Run High School and GM Powertrain.


In Reply to: Wiring Additional Switches on the OI
Posted by Michael Bloomfield on 2/17/2001 9:00 AM EST:



: * = Port 4 has access to the 4 unique digital inputs from Port 1 if you need those variables in Custom Switch. Allowing for a total of 16 unique digital inputs because every port has 4 unique variables but all the 16 variables can be accessed from Port 3 and 4 alone.

Actually, all 16 are available between ports 2 and 4...ports 1 and 3 have the LED drivers...unless they changed that on the 2001 controller and nobody told me there was a new control system manual out...

Nate

__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.