|
Re: Camera Help
At this point, I'd encourage you to call the NI number for support to make sure your activation works. The next step I do is to run a LV example such as My Progs/National Instruments/LabVIEW 8.5/examples/FRC/vision/single color...
This lets you see what the camera sees and lets you play with colors and lighting most easily. After that you can try other examples such as the two color gimbal.
The setup for these examples is pretty standard for everything else on the control system. DS, computer, cRIO, and camera all connected with enet. Orange cable between camera and cRIO. Be sure to enable the DS -- doesn't actually matter for camera demos, but a good habit to get into.
Greg McKaskle
|