Quote:
Originally Posted by fordchrist675
The CRIO kept posting error messages
|
It will help if we know what these error messages are.
1. Use the Orange Crossover cable with the camera.
2. Make sure the camera is set correctly (Brightness = 40, Light settings = Flourescent 1) using the Axis instructions after connecting the Cam to your PC. Make sure you hit "Save" after the changes to the cam.
3. Make sure that the Green/Pink is the right way up as the program expects it - in the program (C/C++) there is a setting for ABOVE and BELOW. If the colors are reversed to what the program expects it won't find it.
4. Make sure that the cam is receiving signal by watching for the Green light around the lens.
5. Make sure your target is not too close or too bright.
6. For the C/C++ code, teams will have to play around a bit with cam settings and HSL values to make sure everything works.
7. The C/C++ code is based on SimpleRobot so once it is out of Autonomous, it won't go back to Auto even if you flip the DS Auto/Tele Switch - you will have reboot the cRIO with the Autonomous enabled on the DS.