[Ted Weisse]

If you are having problems with the LV example, I'd be glad to help. The first thing I'd advise is setting the radio button near the image display to turn off the gimbal, so the camera will hold still and you will see what the camera sees. Make sure it is focused, make sure your target is in the scene. And hopefully the mask display below will show you the results of the red/green thresholds.

Greg McKaskle[/quote]


We can track a single color and the example when in camera mode sees both red and green thresholds. When we enable the gimbal and the DS the pan/tilt searches. On the screen we see the green lagging the red target as it goes across the screen.

What are we doing wrong?

Thanks....