|
Re: Code Base
OK to avoid creating another thread, and its similar in nature anyway:
How the fork do I set up the connections to download code to the robot?
The guide is VERY VERY vague in this, as it just says
1. Download
2. Reboot
[facepalm]
Do I have to set up cables through the drivers sation then to the cRIO? Or can I just go straight from the laptop to the cRIO? And I assume the IP on the laptop has to be the 10.xx.yy.6 IP in order to download?
__________________
You can call it the programming teams fault, but we'll just force your arguments nil.
There are 10 kinds of people in the world -> Those who understand binary and those who don't.
WYSIWYG - In FIRST: Greatness
|