[2829ron]

Having searched the forums, and having found similar, but not identical problems, I will ask yet another camera question.

I have the camera connected to my wireless laptop, via the crossover cable. The firewalls are off.

With both IPs set automatically; the Setup Axis Camera tool returns:
"Unable to connect to camera. Ensure the camera is connected to the PC and IP settings are correct." Of course since I didn't set the IP address, brousing to 192.168.0.90 returns, "Internet Explorer cannot display the webpage." At this point though, the camera shows up in My Network Places, and I can log on to it to receive video, and change time settings, etc...

So next, I tried to follow the instructions in 5.5. With the IPs set to 192.168.0.6 on the wireless network connection, and 192.168.0.90 on the local area connection; the Setup Axis Camera tool returns, "ANUnable to complete operation because of unexpected error %d:%s63 TCP Open Connection in Axis Issue HTTP Request with Authentication.vi->Axis Issue Get.vi->Axis Create FRC User.vi->Dialog.vi." Brousing to 192.168.0.90 returns, "Internet Explorer cannot display the webpage."

What do I need to do to set it up correctly? I suspect I'm not setting the computer IP address correctly, but don't know what to do differently.

Thanks.
2829