View Single Post
  #30   Spotlight this post!  
Unread 21-01-2009, 07:03
Teched3 Teched3 is offline
Hodge1
FRC #0175 (BuzzRobotics)
Team Role: Mentor
 
Join Date: Apr 2006
Rookie Year: 1996
Location: Connecticut
Posts: 319
Teched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud ofTeched3 has much to be proud of
Smile Re: pic: Wheel problem.

Checked the wheel mounting hole size last night on a wheel, and they are definitely NOT sized with a 10-32 or 10-24 tap hole. An 8-32 clearance hole is about right, but a little more sloppy than I would normally like. If you keep your sprocket and spacers centered on the wheel hub, the 8-32 bolts should work fine, and you will eliminate sprocket runout. Sorry for my previous post, but I even checked with A/M and was assured the CAD drawing was correct a 3/16".
__________________
Sweat the details
Why is there never enough time to do it right, but always enough time to do it again!
Even if you're on the right track, if you sit still, you'll get run over!!!
Reply With Quote