[TotalChaos]

Originally Posted by GunfighterJ

is there anyway to take a joystick button and run it through a vi where it will do one function. Then go through some switch and do another function?

The short answer is yes.

I'm not sure there is one specific VI that does what you want, but it would certainly be possible. If I'm understanding you correctly you want a button that when pressed switches from doing one thing to another and doesn't change until the button is pressed again. If that is what you mean then you could check out the VI attached as an example of one way to do this. There is documentation of what I did on the block diagram in the VI.

- Austin