|
Re: Issue with debugging/running code on cRio
we have been using the cRio with wind river successfully.
first thing i would do is download the latest cRio update and re-image the Rio for wind river just to make sure it doesn't think your using labview.
then check and make sure your downloading the right file from wind river by going to Window->properties (or something close to that) click on the FIRST downloader options and check the team number and make sure your pointing to the correct .out file(i have gotten the same error your getting by downloading the wrong file)
and remember you have to un-deploy -> download -> and then reboot the cRio before the downloaded code will run.
also make sure you set your team number right on the driver station and have all the correct ip's on the gaming adapter (radio), rougher, cRio and the computer you are using is not in conflict with any of them.
Tip:
it is more convenient to use the debug feature so the code will run without a reboot.
good luck,
|