Posted by Anton Abaya at 2/21/2001 10:13 AM EST
Coach on team #419, Rambots, from UMass Boston / BC High and NONE AT THE MOMENT!
.
In Reply to: Check the Manual...
Posted by Nate Smith on 2/20/2001 5:54 PM EST:
: : Hey a few hours before shipping...
: : Does anyone know of a way to wire the Double Solenoid
: : Valve to ONE Spike Relay?
: : A quick answer would be much appreciated...
: : :-)
: : Chris
: : Team #36
: If you look in the manual, it talks about using the diodes(also included in the kit) to write the double solenoid in such a way that you can use a single relay...OR, you could most likely(guessing here now) use the method that's in the manual for connecting two one-way items to a single relay...don't remember exactly where it is, but take a look...
: Nate
and failed... heh. something went wrong somewhere and we started smelling something funny.
so we just took a spike from last year and used that one. it's the easiest solution.
-anton