I have been trying to get the SimpleTemplate example project to run on the cRio with no luck. I can ping and connect to the cRio and see a list of running tasks, so it's out there. However, when I attempt to debug the program it gives a LONG list of unresolved symbols (about 40 visible on screen of nFPGA methods, the window truncates so I have no idea how many more). Something isn't setup correctly.
I'm told the cRio has been updated properly, but have also been unable to verify this. So specific questions:
- I tried undeploy on the chance something was loaded and is interfering. I get an immediate error message:
"Unable to delete the UserProgram from the robot."
Does this mean there's nothing loaded or that it isn't talking correctly?
- Is there a way to tell what version of cRio software is running and whether it is set for C++ or Labview?
- I have tried to re-image the cRio to make sure the correct image is loaded, but the re-image utility cannot find the cRio. It's at the correct 10.22.61.2 address I can ping it, and my firewall is off. Does the re-image utility require that the cRio be set to the default IP address or is there something else I need to do?
Thomas Wicklund
Team 2261