Thread: Cannot connect to the Real-time target
View Single Post
  #1   Spotlight this post!  
Unread 24-01-2009, 16:07
domoarigato's Avatar
domoarigato domoarigato is offline
Team #1208 CCO
AKA: Coony
FRC #1208 (Metool Brigade)
Team Role: Engineer
  
Join Date: Nov 2008
Rookie Year: 2008
Location: O'Fallon, Il
Posts: 32
domoarigato is an unknown quantity at this point
Re: Cannot connect to the Real-time target
We are having the same problem and when we went to ping it, it timed out. V . V;;;;; Our laptop can't send our code to the cRIO and doesn't even see the Real Time thing.... We've tried pretty much everything we can think of and it still doesn't see it. (The wireless definitely isn't the problem; the joysticks can drive the robot with the base code that is already in there.... so pretty sure that's not wired incorrectly.) Uhmmm.... it was re-imaged properly and all. The IP addresses are right... (10.12.08.2 and whatnot.) the firewall is killed... and the wireless card on the laptop is disabled as well so it wouldn't interfere when we connected the laptop to the driver station.

*sigh* Anything else we can do to get this thing to work?
Reply With Quote