|
Re: Jaguars Slow Yellow Blink - Possible Control System Issue
Quote:
Originally Posted by Mark McLeod
It goes against my grain to say this but that's a software problem not a hardware problem. 
(Never trust a DS Rev from October 39, 2008)
...
Everything fine and working, the startup code seems to be fine, but you may have a timing condition that leaves a window for the Watchdog to fail and PWMs to fail to initialize.
Are you running parallel processes as in independent LabVIEW loops that could cause synchronization issues where something can get used before it's been properly initialized? |
HaHa, thanks. The DS rev is 2008-10-29a.
The part that it might be a software problem also concerns me... I haven't modified the default code very much. I made a "Basic Robot" project in LabVIEW and changed the Arcade Drive in TeleOp to Tank Drive. I've also set the autonomous conditional to allow it to run.That's it. Here is a link to my code if anyone is interested.
__________________
"FIRST is like bling bling for the brain." - Woodie Flowers
Last edited by MikeDubreuil : 26-01-2009 at 00:19.
Reason: I added autonomous
|