|
Clarification - where along that line?
meaubry wrote:
> On the backside, away from the field we will be using L shaped angle aluminum brackets.
OK.
> You are correct in guessing corner to end of shelving unit. [If the bottle can fall through then slide it down further.]
Where, slid along that line? Do we center the gap (equidistant space between top corner and shelving gap), or run it all the way to the top?
Hmmm... On second thought, rather than have our mockup deviate from yours by just "setting a gap until it doesn't fall through", can you please just tell me what YOUR measurement is?
Imagine a line on the divider board from the top left corner (top back edge) of the divider to the end of the shelf notch. Measure along that line from the top corner until you hit the center of thin edge of the backboard, which should be lying on that line. What is THAT length?
Better yet (and easier to measure), what is the exact gap size??
Thanks!
- Keith McClary, Huron High Team 830
__________________
Keith McClary - Organizer/Mentor/Sponsor - Ann Arbor MI area FIRST teams
ACTI - Automation Computer Technologies, Inc. (Sponsoring FIRST teams since 2001!)
MI Robot Club (Trainer) / GO-Tech Maker's Club / RepRap-Michigan) / SEMI CNC Club
"Certifiably Insane": Started FIVE FRC teams & many robot clubs (so far)! 
2002: 830 "Rat Pack" | 2003-5;14: 1015;1076 "Pi Hi Samurai" | 2005-6: 1549 "Washtenuts"/"Fire Traxx"
2005-(on): 1502 "Technical Difficulties" | 2006-(on): FIRST Volunteer! 
2009-(on): 470 "Alpha Omega" | WAFL | Sponsor & "Floating Engineer" for MI Dist 13 (Washtenaw Cnty)
2011: 3638 "Tigertrons" | 2013-(on): 4395 "ViBots" | 2014-(on) 66 "Grizzlies"
"Home" Teams: 66, 470, 1076, 1502, 4395
Local FIRST alumni at or coming to Ann Arbor (UM/EMU/WCC/Cleary)?
...We Want YOU as a Mentor! Please email me for info!
Support CDF Reputation - If a posting helped, thank 'em with rep points!
"It must be FRC build season when your spouse and children become 'Action Items 8 & 9'..."
|