Quote:
Originally Posted by Tack610
The buttons on the joystick still light up the LED's on the cRIO...
|
Can you elaborate on that?
Quote:
Originally Posted by Tack610
the battery says 00.00V which is what it said when it still worked. For a time being it had said 00.19V i dont know what that means though.
|
That means you don't have battery voltage going to the battery monitor circuitry on the analog breakout plugged in to the analog input module installed in slot 1 of the cRIO. Make sure the I7 selection jumper is installed between the outer two pins on that breakout, and make sure you have power to the WAGO connector on that breakout.