Thread: v11 cRIO Image Error
View Single Post
  #5   Spotlight this post!  
Unread 29-01-2009, 16:50
Team1710's Avatar
Team1710 Team1710 is offline
Registered User
FRC #1710
  
Join Date: Jan 2009
Rookie Year: 2007
Location: Kansas City
Posts: 95
Team1710 is an unknown quantity at this point
Re: v11 cRIO Image Error
Yep, I tried a full power down and made sure the reset switch is off. I'm still getting the "IP Adress error make sure your IP Reset switch is off" deal.

Currently, my cRIO's name is "temp" and it's IP is 0.0.0.0...and its not letting me image the v11 image.

Edit

After aquiring a mind of its own, the cRIO has suddenly come up with the IP 10.17.10.2 (1710 is our team name). The name is still temp. My static IP is set to 10.17.10.2 with a subnet of 255.0.0.0. I'm now getting this error with the imager:


The specified IP address is unreachable. Ensure that the IP address is on the correct subnet.

The specified subnet for use according to section 5.1.2.3 in the manual says "255.0.0.0" soooo is should be working. Unfortunately its not. Any ideas?
Last edited by Team1710 : 29-01-2009 at 17:14.