|
Re: DIO not working in autonomous.
Quote:
Originally Posted by adamdb
Phil,
If you look at the datasheets, the GPIO lines have a 10K pullup resistor.
|
D'oh, I was reading your post on my iTouch and was sure you were talking about the Driver Station.. Must have been the prior post.
__________________
Phil Malone
Garrett Engineering And Robotics Society (GEARS) founder.
http://www.GEARSinc.org
FRC1629 Mentor, FTC2818 Coach, FTC4240 Mentor, FLL NeXTGEN Mentor
|