[darty]

Ok a little update. We reimaged the cRIO and let it power down/up. Then, we used the program that is automatically added when you reimage, the arcade drive, it worked.

Then, I opened LabVIEW and went under examples and opened up the sample Arcade Drive Example. The only change I made besides changing the target from 10.0.0.2 to 10.2.4.2 was to change motor type from Victor (the default) to Jaguar (what we're running). And lo and behold, it still didn't work. We also tried the entire process again using the Tank Drive Example, with identical results.


Also, if it makes a difference, we're running Windows in a separate partition in a Mac.