|
Re: pic: Team 617 Robot
From what i can tell it looks like the frame is much thinner in the back then in the front, but bumpers in the front will be a must (if you place bumpers on the vertex of the front corners[you need to] that should remove most problems)
But if your not long enough you would have a problem seeing as your front is angled in bumpers there would not count to your 2/3 rules, and if they were made straight out from the angled section they wouldn't be supported...
so in that respect i agree, you may have some trouble with bumper rules
__________________
Is now an engineer thanks to FIRST.
|