Quote:
Originally Posted by EricH
I did a quick search for the solenoid valve in question. http://www.mead-usa.com/products/detail.aspx?id=1
Now, here's the lowdown: I can only find that it uses a bus system. It looks like you'll have to make your own.
The really bad news is that unless the website is wrong, I don't think you can use it. <R71> specifies that "All included items must be “off the shelf” pneumatic devices rated by their manufacturers for pressure of at least 125psi," and the largest rating I can find is 120 PSI. <R71-C> also specifies a maximum of 1/8" NPT port diameter, and the product doesn't go that low, according to the specs.
So, you're going to need to really look closely at <R71> and compare your product to that. If it doesn't meet one of the requirements, it won't pass inspection. |
Eric appears to have corrected me, I assumed you were using the solenoid from the kit.