Thread: No RSL on Digital Sidecar
View Single Post
  #1   Spotlight this post!  
Unread 02-02-2009, 16:14
shobuda999 shobuda999 is offline
Registered User
None #1995
  
Join Date: Jan 2005
Rookie Year: 2001
Location: Connecticut
Posts: 7
shobuda999 is an unknown quantity at this point
No RSL on Digital Sidecar
Hi Everyone,

Our team is having a serious problem. our RSL is not lighting up at all. We have ran through the benchtop test, and had everything working wirelessly. We have all the latest Labview updates and have successfully deployed the default code. We have the most recent DS update. When we put our hardware into our robot however we noticed our PWM's aren't getting a signal. After doing some research I realized that our digital side car didn't have the robot status light illuminated at all. We switched it out with the other board in the kit, but we are having the same results. We're beginning to worry that the CRio is dead. All the power lights are on solid green, and we have the board connected to slot four of the CRIO. Has anyone experienced this?
Reply With Quote