View Single Post
  #24   Spotlight this post!  
Unread 02-02-2009, 23:44
dani190 dani190 is offline
Registered User
AKA: Dani
FRC #2185 (RoboRams)
Team Role: Leadership
 
Join Date: Feb 2007
Rookie Year: 2007
Location: Canada
Posts: 164
dani190 is a splendid one to beholddani190 is a splendid one to beholddani190 is a splendid one to beholddani190 is a splendid one to beholddani190 is a splendid one to beholddani190 is a splendid one to beholddani190 is a splendid one to behold
Send a message via MSN to dani190
Re: We're trying to lose weight...

Quote:
Originally Posted by artdutra04 View Post
If you can, replace as many 1/4-20 bolts with smaller bolts as possible. 228 used to use 1/4-20 for everything, since they were easy to pick up at Home Depot. Then I calculated that by dropping to #10/32 for almost everything, we could save almost 3 pounds; now we exclusively use #10/32 button and socket cap head screws.

Lighten the gears in the Toughbox. Turn pockets into them on a lathe, and/or drill six 7/16" or 1/2" holes through them. This can cut their weight in half.



Don't use 4 CIM motors on a drive train. Use 2 CIM motors, and use chain to connect the other wheels. CIM motors weigh 2.75 lbs each.

Take a second look at material choices. You can do a lot with 1/16"-wall aluminum box tubing and 1/16" polycarbonate (Lexan) without breaking the weight budget.

Using pneumatics? Only use one or two accumulators. They weigh a pound each.

Edit: But most importantly, treat this as a weight-per-effort knapsack problem. That is, go after the densest materials first that take the easiest amount of effort to remove a relatively high amount of weight. Then keep working downwards towards the parts where it'll take a lot of effort to only remove a little weight.

smart idea... or order the aluminum lighter ones...

But i think il be doing this soon... very smart
__________________
Reply With Quote