Thread: No RSL on Digital Sidecar
View Single Post
  #1   Spotlight this post!  
Unread 03-02-2009, 10:47
popo308's Avatar
popo308 popo308 is offline
Registered User
AKA: Brent
FRC #1625 (Winnovation)
Team Role: Alumni
  
Join Date: Jan 2007
Rookie Year: 2006
Location: Winnebago, IL
Posts: 312
popo308 is a name known to allpopo308 is a name known to allpopo308 is a name known to allpopo308 is a name known to allpopo308 is a name known to allpopo308 is a name known to all
Send a message via AIM to popo308
Re: No RSL on Digital Sidecar
Quote:
Originally Posted by shobuda999 View Post
Our team is having a serious problem. our RSL is not lighting up at all. We have ran through the benchtop test, and had everything working wirelessly. We have all the latest Labview updates and have successfully deployed the default code. We have the most recent DS update. When we put our hardware into our robot however we noticed our PWM's aren't getting a signal. After doing some research I realized that our digital side car didn't have the robot status light illuminated at all. We switched it out with the other board in the kit, but we are having the same results. We're beginning to worry that the CRio is dead. All the power lights are on solid green, and we have the board connected to slot four of the CRIO. Has anyone experienced this?
Quote:
Originally Posted by shobuda999 View Post
All the power lights are on solid green
Are you talking about the lights on the DSC?

if not...
be sure you have the 12v input on the DSC powered. We forgot to do this once and had the same symptoms...
Last edited by popo308 : 03-02-2009 at 10:49.
Reply With Quote