Quote:
Originally Posted by lordsoze
Hello everybody. I'm a noob from team 2432. So i'm kinda of new at this robotics stuff.
1st What screws are used to mount down the CRIO.
2nd How do u mount the CRIO
3rd. What's the best way to program the CRIO
4th What is the main purpose of the anolog breakout
5th What nails can be used to mount down the jaguars, anolog breakout, and power distrubution board
And finally how do u encode the team name into the CRio
I know I have a lot of questions, but this is only my 2nd year. lol.
Any speedy help would be greatly appreciated.
|
Generally, there are no rules on how to build your robot. It does not matter what screws, nails, zip ties, etc... you use as long as it works. Just use common sense, and you'll probably be all right. Do
read the manual though.
I would recommend not using zip ties to mount the cRIO. It's too heavy to be mounted with zip ties and to remain on the robot during competition. I would use a small machine bolt, but remember to keep it insulated from the frame (aka use a piece of wood or some other non-conductive material to mount the cRIO).