Quote:
1.) What exactly does the battery status say on the driver station?
- If it say's "No Comms" you have a communication issue. Perhaps the team number isn't set correctly on the cRIO (set during imaging) or the driver station.
- If it says "No Code" you should re-image the cRIO using a wired link.
- If it says a reasonable voltage than we have to start looking in other places for the problem and will need additional information.
|
Our battery voltage shows 00.00V all the time unless something is disconnected or we put our own code on it.
Quote:
|
2.) What is the robot signal light doing on the digital sidecar?
|
The lights are constantly solid green. We're not really sure what they mean though.
We imaged it while it was wired this time, but there still hasn't been any progress. Thanks for the help, but are there any other suggestions you can give us in addition to these?