11-02-2009, 07:36
|
 |
 |
Cogito ergo arbitro
no team
|
|
Join Date: Aug 2005
Rookie Year: 2000
Location: Royal Oak, MI
Posts: 5,739
|
|
|
Re: 2729 Safety
Quote:
|
<R05> Exterior or exposed surfaces on the ROBOT shall not present undue hazards to the team members, event staff or GAME PIECES. Reasonable efforts must be taken to remove, mitigate, or shield any sharp edges, pinch points, entanglement hazards, projectiles, extreme visual/audio emitters, etc. from the exterior of the ROBOT. All points and corners that would be commonly expected to contact a GAME PIECE should have a minimum radius of 0.125 inches to avoid becoming a snag/puncture hazard. All edges that would be commonly expected to contact a GAME PIECE should have a minimum radius of 0.030 inches. All of these potential hazards will be carefully inspected.
|
So if the points are less than 1/8" radius, they should be shielded.
__________________
 (since 2004)
|