[EricH]

Originally Posted by HarryScheiner

It's connected with belts, but as bighead said before, we ran it straight from the battery (the entire mechanism, belts and all) and it ran fine.

So, it's not the code. Therefore, I have the following questions:

1) What's the gear ratio? (If you don't know, what gearbox are you using/what size are the pulleys?)
2) What's the breaker on the circuit?
3) Is the Jag calibrated? (I'm guessing it is...)
4) Are there any other variables that changed between tests? i.e., were there any additions, were both tests run with a fresh battery, etc.?