Thread: Struggling To Program CRIO
View Single Post
  #2   Spotlight this post!  
Unread 12-02-2009, 00:14
1jbinder 1jbinder is offline
Registered User
FRC #0852
  
Join Date: Jan 2008
Location: Athenian School
Posts: 35
1jbinder is an unknown quantity at this point
Re: Struggling To Program CRIO
Your first problem is that you are not getting any connectivity between the DS and the cRIO. The DS should display a voltage if you have communication. You should check the voltage of your main battery, also make sure that your analog module and bumper are attached. Have you tried going directly from the DS to the cRio? This might solve some communication problems. Just make sure the wheels are off the ground so the robot does not take off while the DS is connected.
Hope this helps,
Julian