Quote:
Originally Posted by Dr. Manhattan
We tried testing it with the full range of color available, yet for some reason the green doesn't show up at all. So far I have no clue why. And for some reason the servo's aren't moving while on gimble tracking mode, I assume they're supposed to and have no clue why.
And yes, see you there. 
|
The way I did it when it absolutely failed to pick anything up was to start with the range 0-255 for all 3 (hue, saturation, and luminance) and narrow it down from there. Slow, but it works.
Did you put the jumpers next to the servo pwms? Are the pwms in the program the correct ones/where the servos are plugged in?
-jonathan