[SmithWest]

I've been working with Brandon on this issue and we think we solved it today.

The solenoid channels we were feeding into our code didn't match the pin numbers on the solenoid breakout. Either we are doing something weird in the code that we are not aware of, or we missed documentation on this translation. We did some trial and error testing of which reference in the code activated which light on the cRIO 9472 and discovered this:

In Labview assigning channels 1 and 2 produced no result on the cRIO. 3 linked to pin 8, 4 to 7, 5 to 6, 6 to 5, and so on.

We now have joystick buttons operating all of our solenoids. Thanks to everyone who advised us on this problem. All suggestions helped us better understand this system.