Thread: [FTC]: Any teams using dead axles for arms?
View Single Post
  #15   Spotlight this post!  
Unread 15-02-2009, 16:42
FTC 2891 FTC 2891 is offline
Registered User
FTC #2891
  
Join Date: Feb 2009
Location: San Jose
Posts: 2
FTC 2891 is an unknown quantity at this point
Re: [FTC]: Any teams using dead axles for arms?
Our team had a problem with slipping clamps too. However, we were running compound gearing on the arm so we had to have live shafts. We attached two split clamps to each gear by drilling out the threads on one clamp and putting a 1.5" socket head screw across the drilled out clamp, gear, and into the threaded clamp on the other side of the gear. The addition of a thread locker would be helpful too.
Reply With Quote