View Single Post
  #2   Spotlight this post!  
Unread 16-02-2009, 11:35
TDohse TDohse is offline
Registered User
AKA: Thomas
no team (NI)
 
Join Date: Apr 2008
Rookie Year: 2008
Location: Austin, TX
Posts: 39
TDohse is an unknown quantity at this point
Re: How to check versions

If you FTP to your cRIO, there is a file named FRC_ImageVersion.txt which shows image version, date, FPGA version, and NetComm version. If your cRIO doesn't have that file, it most likely means you have an old image on the device (earlier images lacked that file).

A second method of determining if your cRIO is up to date, is to watch the console output when the device boots. If you have FRC_2009_v11.zip on the cRIO, you will see this output:

Code:
FRC_NetworkCommunication was compiled from SVN revision 1712
FPGA Hardware GUID: 0x6F0EA7B88ADB8E3FD4127A39E3502C6D
FPGA Software GUID: 0x6F0EA7B88ADB8E3FD4127A39E3502C6D
FPGA Hardware Version: 2009
FPGA Software Version: 2009
FPGA Hardware Revision: 1.0.0
FPGA Software Revision: 1.0.0
Reply With Quote