|
Re: questions regarding <R73> [pneumatics rules]
We used an off-board compressor two years ago. Our understanding was that all components that would be in an ON-BOARD system still had to be there except for the compressor. We had 2 electrical leads coming from our ON-BOARD switch that we would connect to the compresssor, and had a quick connect air fitting on the compressor that connected to the feed line on the robot. All relief valves, regulators, gauges, etc were on the robot. Only thing not on the robot was the compressor itself.
Had no problems with inspections at all at either the regionals or championship.
|