Quote:
Originally Posted by EricH
It does NOT say that the Spike and pressure switch must be on the robot. They may be with the compressor, on a compressor board. At least, that's the way I see it. (Note: if you do this, make sure that you make it easy to connect the Spike and pressure switch.)
|
The Pressure Switch must be on the robot per <R73-C> and <R77>.
If you are planning on trying to ditch the Spike I would certainly submit it as a question to the Q&A. Based on the note accompanying <R74> stating that the only difference is the physical location of the compressor, I believe the Spike must be left on the robot at all times (however, my opinion doesn't really mean squat).