Okay so our team wanted to keep off the camera setup and all until we got everything in our original design working perfectly, so basically we just started with the camera configuration, I typed it all out in a text file before we left for the day so that I could get help so here is all the info:
Quote:
Using cross-over ethernet cable
Firmware Version 4.40
MAC address: 00:40:8C:8E 1:15
Username: root
Password: admin
We are using the "Use the following IP address" option [not "obtain IP address via DHCP"]
IP address: 192.168.0.90
Subnet mask: 255.255.255.0
Default router: 10.24.29.4
Enable ARP/Ping setting of IP Address is checked
Video & Image are all defaults
|
So we plugged the crossover into our laptop and were successful in getting the image with the above settings. So then we hooked it to the robot and tried to get an image, and didn't know how. So:
1) Can you even receive an image from the camera when it's hooked to the cRIO?
2) If yes, how?
3) If no, how can you get feedback from the camera that it sees anything at all?
TY to any who reply.