Quote:
Originally Posted by Mark McLeod
Nothing off the top of my head, unless it's something simple like your team number got entered incorrectly when you reimaged the cRIO. But that's easy to test just by running the pinger, and you'd get an error message from Wind River anyway.
Downloading should work all by itself to transfer the file specified by Window -> Preferences without regard to the Imaging Tool or even Undeploy.
No error messages, it appears to download, but nothing runs after you restart the robot...
I assume you are up-to-date with the latest:
-Wind River Update 3 1/27/2009
-the cRIO has the v11 image on it now,
-and the Driver Station has firmware version 2009-02-10a3
Any useful status displayed on the Driver Station?
|
Okay so I undeployed it restarted, tried to debug and it says
Then our DS display is the following if I do FIRST->Download, and restart the bot.
Quote:
Team: 2429
Mode: Teleoperated
System: Enabled
Battery: No Code
DS Rev: 2008-10-29a
|
yes I updated the cRIO with th version from 1/27, but if there was another one after that then I don't know about it. Also I checked the Window->Preferences. The only thing is that when I re-imaged it to get the img from the camera I checked the bubble LabVIEW, and then once I got it, I re-imaged the cRIO with Wind River and after I did that it no longer works, what should I do I am thinking about resetting the cRIO and then re-image it again, what is your suggestion?