|
Re: 2009 Peachtree Regional
I believe what I'm about to say should be relevant to Peachtree, but this may have occurred elsewhere as well.
In SF 1-2, our robot would drive. More specifically, our pick-up and dumping mechanisms functioned the entire match, but our drive motors never did. There is no way to know whether or not the Jaguars driving the two cims were getting a signal, but I doubt it. The jags were connected properly before and immediately after the match, when I checked. Back at the pit (after we lost), we immediately tethered and drove the robot. It operated flawlessly. Our team has mixed feelings about why this happened, but I believe it was a field issue. However, it was only the drive motors (which plug into to pwms 1 and 2, so maybe the signal for those weren't getting there?!?!).
Did any other teams have issues with their robot mysteriously work only partially? This has really been bugging me...
__________________
Genius is 1 percent inspiration and 99% perspiration, which is why engineers sometimes smell really bad.
Last edited by joshsmithers : 18-03-2009 at 22:02.
|