|
[Vex] Spontaneous channel switching/dying
We are having an unusual problem with our vex elevation robot. Controls from Rx1 work fine. However, for about one boot out of every four, about 30 seconds after teleoperated mode begins, signals from Rx2 begin to undergo a bizarre, repeated, pattern:
Channel 5 (controlling motors 5 and 6) does not work
Channel 4 (controlling motor 7) instead controls motor 8
Channel 3 (controlling motor 8) does not work.
After about 45 seconds of this, the robot returns to normal.
Rx2 Light remains on at all times, and no code error light flashes
This problem has never occured under tether, but its occurence is inconsistent enough that i could believe that this is a coincidence
Any suggestions as to why this might be/how to solve it?
__________________
FIRST is not about doing what you can with what you know. It is about doing what you thought impossible, with what you were inspired to become.
2007-2010: Student, FRC 1687, Highlander Robotics
2012-2014: Technical Mentor, FRC 1687, Highlander Robotics
2015-2016: Lead Mentor, FRC 5400, Team WARP
2016-???: Volunteer and freelance mentor-for-hire
Last edited by Joe G. : 14-04-2009 at 20:55.
|