Quote:
Originally Posted by Roger
There is also the "programming button" on the robot's controller that must be pressed prior to downloading. Press it only long enough for the lights on the controller to change -- much longer and you get the "christmas lights" effect [blinky lights] which you don't what it to do. It sounds like you got that part okay.
|
What can you do to get rid of this christmas lights effect I'm getting it on start-up now, and can get solid orange on the program state and RC mode, if I hold down the prog button, but everything else (Battery Power, Radio Modem, RC Hardware) is blinking green.
I've gotten a little closer when we reconfigured the baud rate and port connections, and I'm now finding the control board, but I'm receiving a different error. Runtime Error ''11: Division by zero. and after I recieve this error the programming state returns to it's pervious flickering orange