|
Re: Trebuchet (Joining Lumber)
I went back to the model and adjusted the arm again.
There is a 2x6 running the entire length, with a 1x4 on each side where the pivots are, however those could be easily taken out of the plan. At this point they are only there because the bearings I have are too long to have one on each side of a 2-by.
Thanks for all the input, everyone.
__________________
 ______
I was in Scouts but I wanted out by the third meeting. I was in TSA, but I quit after a couple of weeks. I don't go camping with the SCA anymore. I was in taekwondo but I had to leave because I got sick.
I joined FIRST and stuck with it. It was nice enough to return the favor.
|