Quote:
|
what are the gears used in this? and what is the final reduction also? thanks
|
The gears used are standard Andymark.
All ratios start with a 14 tooth CIM gear to a 35 tooth .375" hex gear.
The remaining gears can be any that follow the Toughbox spread of 64 teeth max.
There are many ratios possible, the four most relevant using the CIM are as follows:
14.8:1 or about 4.8 ft/sec at max power
9.87:1 or about 7.2 ft/sec at max power
6.94:1 or about 10.36 ft/sec at max power
5.36:1 or about 13.4 ft/sec at max power