Quote:
Originally Posted by viper110110
Sorry I forgot to mention, I'm using windriver workbench. I believe the IP addresses are all set correctly, as I have not changed them. I have the laptop plugged into the DS, plugged into the router and the bot connected to the router. I have also tried connecting the bot directly to the DS, with the laptop still connected to the DS. I have also tried connecting the laptop to the router.
This seems to be either an error putting the code on the robot or an error running the code.
|
Then I can help
are you entering the entry point correctly with the right options? Right click the correct project, Run kernel task, Run? the target is connected properly, and set as the location to download to? also make sure that the run dialogs Download and Build project tabs contain one entry, your project, with the download, a path, a checked checkbox, an unchecked checkbox, and an option
You should not run when code is downloaded, it may cause errors, so I would Unload the current code (reboot), and run, debug etc, then when you are finished, set the correct project (window prefernces...) and then download.