View Single Post
  #1   Spotlight this post!  
Unread 09-10-2009, 11:20
BLAQmx's Avatar
BLAQmx BLAQmx is offline
Software Engineer
no team (National Instruments)
Team Role: Engineer
 
Join Date: Sep 2008
Rookie Year: 2008
Location: Austin, TX
Posts: 100
BLAQmx is a glorious beacon of lightBLAQmx is a glorious beacon of lightBLAQmx is a glorious beacon of lightBLAQmx is a glorious beacon of lightBLAQmx is a glorious beacon of lightBLAQmx is a glorious beacon of light
Re: [FTC]: NXT-G programming

Ivybotter,

The blocks you are describing are only available in the FTC software that shipped with last season's KOP. This season FIRST suggests that teams who used NXT-G in the past to use it for initial testing and prototyping, but they recommend you to move to LabVIEW or RobotC for full competition support.

I highly recommend you and your students spend the time becoming familiar with the fully supported software (for example if the old NXT-G blocks don't play nice with the FCS no one from LEGO or NI is going to fix it ). Since you have used NXT-G in the past LabVIEW will probably be the easiest software to pick up. There are a lot of training resources on the web for LabVIEW including the FIRST Community on www.ni.com/first and http://ftcmastery.com/. If you have any questions regarding using the tools or if you run into issues feel free to post of the forums at www.ni.com/first.

Cheers!
Mark
__________________
NI FIRST Community: Where to go for LabVIEW, Wind River, cRIO-FRC, and NXT support.

Last edited by BLAQmx : 09-10-2009 at 11:26.
Reply With Quote