View Single Post
  #3   Spotlight this post!  
Unread 11-11-2009, 13:38
HAL3019's Avatar
HAL3019 HAL3019 is offline
Registered User
AKA: Mike LiBretto
FTC #3019 (HAL)
 
Join Date: Nov 2009
Rookie Year: 2008
Location: Massapequa, NY
Posts: 11
HAL3019 is an unknown quantity at this point
Send a message via AIM to HAL3019
Re: [FTC]: Can anyone lend assistance?

Quote:
Originally Posted by BLAQmx View Post
Once you are connected to your NXT (you should see your NXT's name in the bottom left-hand corner of the block diagram and front panel windows) you can either press the Run, Deploy, or Debug button. All of these will compile you code and automatically download the RXE file to the brick. The functional difference between these 3 buttons is as follows.

Run: Compiles, downloads, and immediately begins running the program.
Deploy: Compiles and downloads the program.
Debug: Compiles, downloads, and immediately begins running the program. The front panel window for the VI goes into a run state and Front Panel controls and indicators can be used to interact with the program running on the brick.
Okay thank you (finally found the quotes!) now could you... recommend (?) any programming methods for this year? (ie. conditions, loops, nxt usage)
And the template installed w/ LV is the template that we should be using, right?
Reply With Quote