|
Re: Axis Camera Communications Error
Quote:
Originally Posted by furiousgeorge
i tried doing both methods, neither seemed to work. when i typed the ip address into the url portion of my browser it didnt open any page, it only gave me a "page could not be found" display. and i am using a cross over cable, so that couldnt be the issue, and i double checked the ports on my cRIO i have everything plugged in where it should be. i'm still confused why this camera isnt working and giving me so many problems  |
If neither method works and you are certain you configured the PC's network to have address 192.168.1.6, the issue is most likely in the camera it's self.
1) Make sure the camera is powered correctly. Use the AC adapter provided with the KOP. You will see the clear plastic ring around the lens light up orange and/or green.
2) If the camera is powered correctly and still no communication takes place, try resetting the camera. I believe holding down the reset button for ~10 seconds while the camera is powered should do the trick. (Someone please verify this for me)
Let us know what you find, it will help us help you.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|