|
Re: How do you run the pneumatics through the CRio w/o using the Jaguars and the Spik
By using the Solenoid Bumper in slot 8.
Connect the red & black wire from the solenoid directly to the 2-pin Solenoid Bumper. You have 8 available.
Single Solenoids will take up one set of Solenoid Bumper output pins, while Double Solenoids will require two sets of Solenoid Bumper output pins.
In programming use the Solenoid functions to control it.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 20-11-2009 at 15:45.
|