Quote:
Originally Posted by TDohse
This sounds like a firewall issue most likely. MAX and the cRIO imaging tool find NI real-time devices in the same manner, so if MAX can find the target the imaging tool should as well.
What is your network setup? It should be a cross-over cable between your PC and the cRIO (a regular ethernet cable will work on most newer network cards). Settings on the PC should be static IP address 10.xx.yy.5, subnet mask 255.0.0.0 where xx.yy is your team number.
|
Windows firewall has been turned off.
I am using a crossover cable.
Networking is not the issue because the MAX (NI Measurement & Automation eXplorer) tool works and communicates with the cRIO. I can also deploy projects from LabView.
And yes, breadboarding is just an expression. It means the pieces are literally mounted on a piece of plywood for testing.