Quote:
Originally Posted by Pikat
Cool. Try making the inside to inside of the lexan 7.75" apart, the large tube 1.5" in dia, and the small tube 1.25" in dia.
Assuming 0.25" thick lexan.
I'm still trying to find out the radius of that curve cutout.
|
I'll work on that. I was very close. The inside to inside of the lexan was 8". the large tube diameter was 1.5", and i kept the wall thickness at 0.83" which is what FIRST used is the past for field elements made out of steel. Especially the Overpass. The small tube is 1.417" in diameter only because I just made it off of the inner diameter of the large pipe. Same wall thickness.
I can't remember the radius of the cutout, but I believe it was 11"
__________________
Team 79 Alumni '11- Present
Team 79 Driver '09, '10
Team 79 Senior CAD Designer '09, '10
Team 79 President '09
Team 79 Electrical Sub Team Leader '08, '09